A rectangle. More...

#include <qcustomplot.h>

Inheritance diagram for QCPItemRect:

[legend]

Collaboration diagram for QCPItemRect:

[legend]

Public Member Functions
	QCPItemRect (QCustomPlot *parentPlot)

virtual	~QCPItemRect ()

QPen	pen () const

QPen	selectedPen () const

QBrush	brush () const

QBrush	selectedBrush () const

void	setPen (const QPen &pen)

void	setSelectedPen (const QPen &pen)

void	setBrush (const QBrush &brush)

void	setSelectedBrush (const QBrush &brush)

virtual double	selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=0) const

	QCPItemRect (QCustomPlot *parentPlot)

virtual	~QCPItemRect ()

QPen	pen () const

QPen	selectedPen () const

QBrush	brush () const

QBrush	selectedBrush () const

void	setPen (const QPen &pen)

void	setSelectedPen (const QPen &pen)

void	setBrush (const QBrush &brush)

void	setSelectedBrush (const QBrush &brush)

virtual double	selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=0) const

Public Member Functions inherited from QCPAbstractItem
	QCPAbstractItem (QCustomPlot *parentPlot)

virtual	~QCPAbstractItem ()

bool	clipToAxisRect () const

QCPAxisRect *	clipAxisRect () const

bool	selectable () const

bool	selected () const

void	setClipToAxisRect (bool clip)

void	setClipAxisRect (QCPAxisRect *rect)

Q_SLOT void	setSelectable (bool selectable)

Q_SLOT void	setSelected (bool selected)

QList< QCPItemPosition * >	positions () const

QList< QCPItemAnchor * >	anchors () const

QCPItemPosition *	position (const QString &name) const

QCPItemAnchor *	anchor (const QString &name) const

bool	hasAnchor (const QString &name) const

	QCPAbstractItem (QCustomPlot *parentPlot)

virtual	~QCPAbstractItem ()

bool	clipToAxisRect () const

QCPAxisRect *	clipAxisRect () const

bool	selectable () const

bool	selected () const

void	setClipToAxisRect (bool clip)

void	setClipAxisRect (QCPAxisRect *rect)

Q_SLOT void	setSelectable (bool selectable)

Q_SLOT void	setSelected (bool selected)

QList< QCPItemPosition * >	positions () const

QList< QCPItemAnchor * >	anchors () const

QCPItemPosition *	position (const QString &name) const

QCPItemAnchor *	anchor (const QString &name) const

bool	hasAnchor (const QString &name) const

Public Member Functions inherited from QCPLayerable
	QCPLayerable (QCustomPlot plot, QString targetLayer=QString(), QCPLayerable parentLayerable=0)

virtual	~QCPLayerable ()

bool	visible () const

QCustomPlot *	parentPlot () const

QCPLayerable *	parentLayerable () const

QCPLayer *	layer () const

bool	antialiased () const

void	setVisible (bool on)

Q_SLOT bool	setLayer (QCPLayer *layer)

bool	setLayer (const QString &layerName)

void	setAntialiased (bool enabled)

bool	realVisibility () const

	QCPLayerable (QCustomPlot plot, QString targetLayer=QString(), QCPLayerable parentLayerable=0)

	~QCPLayerable ()

bool	visible () const

QCustomPlot *	parentPlot () const

QCPLayerable *	parentLayerable () const

QCPLayer *	layer () const

bool	antialiased () const

void	setVisible (bool on)

Q_SLOT bool	setLayer (QCPLayer *layer)

bool	setLayer (const QString &layerName)

void	setAntialiased (bool enabled)

bool	realVisibility () const

Public Attributes
QCPItemPosition *const	topLeft

QCPItemPosition *const	bottomRight

QCPItemAnchor *const	top

QCPItemAnchor *const	topRight

QCPItemAnchor *const	right

QCPItemAnchor *const	bottom

QCPItemAnchor *const	bottomLeft

QCPItemAnchor *const	left

Protected Types
enum	AnchorIndex { aiTop , aiTopRight , aiRight , aiBottom , aiBottomLeft , aiLeft , aiTop , aiTopRight , aiRight , aiBottom , aiBottomLeft , aiLeft }

enum	AnchorIndex { aiTop , aiTopRight , aiRight , aiBottom , aiBottomLeft , aiLeft , aiTop , aiTopRight , aiRight , aiBottom , aiBottomLeft , aiLeft }

Protected Member Functions
virtual void	draw (QCPPainter *painter)

virtual QPointF	anchorPixelPosition (int anchorId) const

QPen	mainPen () const

QBrush	mainBrush () const

virtual void	draw (QCPPainter *painter)

virtual QPointF	anchorPixelPoint (int anchorId) const

QPen	mainPen () const

QBrush	mainBrush () const

Protected Member Functions inherited from QCPAbstractItem
virtual QCP::Interaction	selectionCategory () const

virtual QRect	clipRect () const

virtual void	applyDefaultAntialiasingHint (QCPPainter *painter) const

virtual void	selectEvent (QMouseEvent event, bool additive, const QVariant &details, bool selectionStateChanged)

virtual void	deselectEvent (bool *selectionStateChanged)

double	rectDistance (const QRectF &rect, const QPointF &pos, bool filledRect) const

QCPItemPosition *	createPosition (const QString &name)

QCPItemAnchor *	createAnchor (const QString &name, int anchorId)

virtual QCP::Interaction	selectionCategory () const

virtual QRect	clipRect () const

virtual void	applyDefaultAntialiasingHint (QCPPainter *painter) const

virtual void	selectEvent (QMouseEvent event, bool additive, const QVariant &details, bool selectionStateChanged)

virtual void	deselectEvent (bool *selectionStateChanged)

double	distSqrToLine (const QPointF &start, const QPointF &end, const QPointF &point) const

double	rectSelectTest (const QRectF &rect, const QPointF &pos, bool filledRect) const

QCPItemPosition *	createPosition (const QString &name)

QCPItemAnchor *	createAnchor (const QString &name, int anchorId)

Protected Member Functions inherited from QCPLayerable
virtual void	parentPlotInitialized (QCustomPlot *parentPlot)

virtual void	mousePressEvent (QMouseEvent *event, const QVariant &details)

virtual void	mouseMoveEvent (QMouseEvent *event, const QPointF &startPos)

virtual void	mouseReleaseEvent (QMouseEvent *event, const QPointF &startPos)

virtual void	mouseDoubleClickEvent (QMouseEvent *event, const QVariant &details)

virtual void	wheelEvent (QWheelEvent *event)

void	initializeParentPlot (QCustomPlot *parentPlot)

void	setParentLayerable (QCPLayerable *parentLayerable)

bool	moveToLayer (QCPLayer *layer, bool prepend)

void	applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const

virtual void	parentPlotInitialized (QCustomPlot *parentPlot)

void	initializeParentPlot (QCustomPlot *parentPlot)

void	setParentLayerable (QCPLayerable *parentLayerable)

bool	moveToLayer (QCPLayer *layer, bool prepend)

void	applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const

Protected Attributes
QPen	mPen

QPen	mSelectedPen

QBrush	mBrush

QBrush	mSelectedBrush

Protected Attributes inherited from QCPAbstractItem
bool	mClipToAxisRect

QPointer< QCPAxisRect >	mClipAxisRect

QList< QCPItemPosition * >	mPositions

QList< QCPItemAnchor * >	mAnchors

bool	mSelectable

bool	mSelected

Protected Attributes inherited from QCPLayerable
bool	mVisible

QCustomPlot *	mParentPlot

QPointer< QCPLayerable >	mParentLayerable

QCPLayer *	mLayer

bool	mAntialiased

Additional Inherited Members
Signals inherited from QCPAbstractItem
void	selectionChanged (bool selected)

void	selectableChanged (bool selectable)

void	selectionChanged (bool selected)

void	selectableChanged (bool selectable)

Signals inherited from QCPLayerable
void	layerChanged (QCPLayer *newLayer)

void	layerChanged (QCPLayer *newLayer)

Detailed Description

A rectangle.

Rectangle example. Blue dotted circles are

anchors, solid blue discs are positions."

It has two positions, topLeft and bottomRight, which define the rectangle.

Definition at line 7370 of file qcustomplot.h.

Member Enumeration Documentation

◆ AnchorIndex [1/2]

enum QCPItemRect::AnchorIndex

protected

Enumerator
aiTop
aiTopRight
aiRight
aiBottom
aiBottomLeft
aiLeft
aiTop
aiTopRight
aiRight
aiBottom
aiBottomLeft
aiLeft

Definition at line 7409 of file qcustomplot.h.

◆ AnchorIndex [2/2]

enum QCPItemRect::AnchorIndex

protected

Enumerator
aiTop
aiTopRight
aiRight
aiBottom
aiBottomLeft
aiLeft
aiTop
aiTopRight
aiRight
aiBottom
aiBottomLeft
aiLeft

Definition at line 4058 of file qcustomplot.h.

Constructor & Destructor Documentation

◆ QCPItemRect() [1/2]

QCPItemRect::QCPItemRect ( QCustomPlot * parentPlot )

explicit

Creates a rectangle item and sets default values.

The created item is automatically registered with parentPlot. This QCustomPlot instance takes ownership of the item, so do not delete it manually but use QCustomPlot::removeItem() instead.

Creates a rectangle item and sets default values.

The constructed item can be added to the plot with QCustomPlot::addItem.

Definition at line 30551 of file qcustomplot.cpp.

References ecvColor::black(), ecvColor::blue(), bottomRight, setBrush(), QCPItemPosition::setCoords(), setPen(), setSelectedBrush(), setSelectedPen(), and topLeft.

◆ ~QCPItemRect() [1/2]

QCPItemRect::~QCPItemRect ( )

virtual

Definition at line 30570 of file qcustomplot.cpp.

◆ QCPItemRect() [2/2]

QCPItemRect::QCPItemRect ( QCustomPlot * parentPlot )

◆ ~QCPItemRect() [2/2]

virtual QCPItemRect::~QCPItemRect ( )

virtual

Member Function Documentation

◆ anchorPixelPoint()

QPointF QCPItemRect::anchorPixelPoint ( int anchorId ) const

protectedvirtual

Reimplemented from QCPAbstractItem.

Definition at line 23381 of file qcustomplot.cpp.

References aiBottom, aiBottomLeft, aiLeft, aiRight, aiTop, aiTopRight, bottomRight, QCPItemPosition::pixelPoint(), and topLeft.

◆ anchorPixelPosition()

QPointF QCPItemRect::anchorPixelPosition ( int anchorId ) const

protectedvirtual

Reimplemented from QCPAbstractItem.

Definition at line 30637 of file qcustomplot.cpp.

References aiBottom, aiBottomLeft, aiLeft, aiRight, aiTop, aiTopRight, bottomRight, QCPItemPosition::pixelPosition(), and topLeft.

◆ brush() [1/2]

QBrush QCPItemRect::brush ( ) const

inline

Definition at line 7385 of file qcustomplot.h.

Referenced by setBrush(), and setSelectedBrush().

◆ brush() [2/2]

QBrush QCPItemRect::brush ( ) const

inline

Definition at line 4034 of file qcustomplot.h.

◆ draw() [1/2]

void QCPItemRect::draw ( QCPPainter * painter )

protectedvirtual

Implements QCPAbstractItem.

Definition at line 30619 of file qcustomplot.cpp.

References bottomRight, QCPAbstractItem::clipRect(), mainBrush(), mainPen(), QCPItemPosition::pixelPosition(), QCPPainter::setPen(), and topLeft.

◆ draw() [2/2]

virtual void QCPItemRect::draw ( QCPPainter * painter )

protectedvirtual

Implements QCPAbstractItem.

◆ mainBrush() [1/2]

QBrush QCPItemRect::mainBrush ( ) const

protected

Definition at line 30671 of file qcustomplot.cpp.

References mBrush, QCPAbstractItem::mSelected, and mSelectedBrush.

Referenced by draw().

◆ mainBrush() [2/2]

QBrush QCPItemRect::mainBrush ( ) const

protected

◆ mainPen() [1/2]

QPen QCPItemRect::mainPen ( ) const

protected

Definition at line 30664 of file qcustomplot.cpp.

References mPen, QCPAbstractItem::mSelected, and mSelectedPen.

Referenced by draw().

◆ mainPen() [2/2]

QPen QCPItemRect::mainPen ( ) const

protected

◆ pen() [1/2]

QPen QCPItemRect::pen ( ) const

inline

Definition at line 7383 of file qcustomplot.h.

Referenced by setPen(), and setSelectedPen().

◆ pen() [2/2]

QPen QCPItemRect::pen ( ) const

inline

Definition at line 4032 of file qcustomplot.h.

◆ selectedBrush() [1/2]

QBrush QCPItemRect::selectedBrush ( ) const

inline

Definition at line 7386 of file qcustomplot.h.

◆ selectedBrush() [2/2]

QBrush QCPItemRect::selectedBrush ( ) const

inline

Definition at line 4035 of file qcustomplot.h.

◆ selectedPen() [1/2]

QPen QCPItemRect::selectedPen ( ) const

inline

Definition at line 7384 of file qcustomplot.h.

◆ selectedPen() [2/2]

QPen QCPItemRect::selectedPen ( ) const

inline

Definition at line 4033 of file qcustomplot.h.

◆ selectTest() [1/2]

double QCPItemRect::selectTest	(	const QPointF &	pos,
		bool	onlySelectable,
		QVariant *	details = `0`
	)		const

virtual

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/ deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

In the case of 1D Plottables (QCPAbstractPlottable1D, like QCPGraph or QCPBars) details will be set to a QCPDataSelection, describing the closest data point to pos.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, mousePressEvent, wheelEvent, QCustomPlot::setInteractions, QCPAbstractPlottable1D::selectTestRect

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, QCustomPlot::setInteractions

Implements QCPAbstractItem.

Definition at line 30605 of file qcustomplot.cpp.

References bottomRight, mBrush, QCPAbstractItem::mSelectable, QCPItemPosition::pixelPosition(), QCPAbstractItem::rectDistance(), and topLeft.

◆ selectTest() [2/2]

virtual double QCPItemRect::selectTest	(	const QPointF &	pos,
		bool	onlySelectable,
		QVariant *	details = `0`
	)		const

virtual

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/ deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

In the case of 1D Plottables (QCPAbstractPlottable1D, like QCPGraph or QCPBars) details will be set to a QCPDataSelection, describing the closest data point to pos.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, mousePressEvent, wheelEvent, QCustomPlot::setInteractions, QCPAbstractPlottable1D::selectTestRect

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, QCustomPlot::setInteractions

Implements QCPAbstractItem.

◆ setBrush() [1/2]

void QCPItemRect::setBrush ( const QBrush & brush )

Sets the brush that will be used to fill the rectangle. To disable filling, set brush to Qt::NoBrush.

See also: setSelectedBrush, setPen

Definition at line 30592 of file qcustomplot.cpp.

References brush(), and mBrush.

Referenced by QCPItemRect().

◆ setBrush() [2/2]

void QCPItemRect::setBrush ( const QBrush & brush )

◆ setPen() [1/2]

void QCPItemRect::setPen ( const QPen & pen )

Sets the pen that will be used to draw the line of the rectangle

See also: setSelectedPen, setBrush

Definition at line 30577 of file qcustomplot.cpp.

References mPen, and pen().

Referenced by QCPItemRect().

◆ setPen() [2/2]

void QCPItemRect::setPen ( const QPen & pen )

◆ setSelectedBrush() [1/2]

void QCPItemRect::setSelectedBrush ( const QBrush & brush )

Sets the brush that will be used to fill the rectangle when selected. To disable filling, set brush to Qt::NoBrush.

See also: setBrush

Definition at line 30600 of file qcustomplot.cpp.

References brush(), and mSelectedBrush.

Referenced by QCPItemRect().

◆ setSelectedBrush() [2/2]

void QCPItemRect::setSelectedBrush ( const QBrush & brush )

◆ setSelectedPen() [1/2]

void QCPItemRect::setSelectedPen ( const QPen & pen )

Sets the pen that will be used to draw the line of the rectangle when selected

See also: setPen, setSelected

Definition at line 30584 of file qcustomplot.cpp.

References mSelectedPen, and pen().

Referenced by QCPItemRect().

◆ setSelectedPen() [2/2]

void QCPItemRect::setSelectedPen ( const QPen & pen )

Member Data Documentation

◆ bottom

QCPItemAnchor *const QCPItemRect::bottom

Definition at line 7404 of file qcustomplot.h.

◆ bottomLeft

QCPItemAnchor *const QCPItemRect::bottomLeft

Definition at line 7405 of file qcustomplot.h.

◆ bottomRight

QCPItemPosition *const QCPItemRect::bottomRight

Definition at line 7400 of file qcustomplot.h.

Referenced by anchorPixelPoint(), anchorPixelPosition(), draw(), QCPItemRect(), and selectTest().

◆ left

QCPItemAnchor *const QCPItemRect::left

Definition at line 7406 of file qcustomplot.h.

◆ mBrush

QBrush QCPItemRect::mBrush

protected

Definition at line 7420 of file qcustomplot.h.

Referenced by mainBrush(), selectTest(), and setBrush().

◆ mPen

QPen QCPItemRect::mPen

protected

Definition at line 7419 of file qcustomplot.h.

Referenced by mainPen(), and setPen().

◆ mSelectedBrush

QBrush QCPItemRect::mSelectedBrush

protected

Definition at line 7420 of file qcustomplot.h.

Referenced by mainBrush(), and setSelectedBrush().

◆ mSelectedPen

QPen QCPItemRect::mSelectedPen

protected

Definition at line 7419 of file qcustomplot.h.

Referenced by mainPen(), and setSelectedPen().

◆ right

QCPItemAnchor *const QCPItemRect::right

Definition at line 7403 of file qcustomplot.h.

◆ top

QCPItemAnchor *const QCPItemRect::top

Definition at line 7401 of file qcustomplot.h.

◆ topLeft

QCPItemPosition *const QCPItemRect::topLeft

Definition at line 7399 of file qcustomplot.h.

Referenced by anchorPixelPoint(), anchorPixelPosition(), draw(), QCPItemRect(), and selectTest().

◆ topRight

QCPItemAnchor *const QCPItemRect::topRight

Definition at line 7402 of file qcustomplot.h.

The documentation for this class was generated from the following files:

/root/ACloudViewer/app/extern/QCustomPlot/qcustomplot.h
/root/ACloudViewer/app/extern/QCustomPlot/qcustomplot.cpp

Public Member Functions

Public Attributes

Protected Types

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ AnchorIndex [1/2]

◆ AnchorIndex [2/2]

Constructor & Destructor Documentation

◆ QCPItemRect() [1/2]

◆ ~QCPItemRect() [1/2]

◆ QCPItemRect() [2/2]

◆ ~QCPItemRect() [2/2]

Member Function Documentation

◆ anchorPixelPoint()

◆ anchorPixelPosition()

◆ brush() [1/2]

◆ brush() [2/2]

◆ draw() [1/2]

◆ draw() [2/2]

◆ mainBrush() [1/2]

◆ mainBrush() [2/2]

◆ mainPen() [1/2]

◆ mainPen() [2/2]

◆ pen() [1/2]

◆ pen() [2/2]

◆ selectedBrush() [1/2]

◆ selectedBrush() [2/2]

◆ selectedPen() [1/2]

◆ selectedPen() [2/2]

◆ selectTest() [1/2]

◆ selectTest() [2/2]

◆ setBrush() [1/2]

◆ setBrush() [2/2]

◆ setPen() [1/2]

◆ setPen() [2/2]

◆ setSelectedBrush() [1/2]

◆ setSelectedBrush() [2/2]

◆ setSelectedPen() [1/2]

◆ setSelectedPen() [2/2]

Member Data Documentation

◆ bottom

◆ bottomLeft

◆ bottomRight

◆ left

◆ mBrush

◆ mPen

◆ mSelectedBrush

◆ mSelectedPen

◆ right

◆ top

◆ topLeft

◆ topRight