An ellipse. More...

#include <qcustomplot.h>

Inheritance diagram for QCPItemEllipse:

[legend]

Collaboration diagram for QCPItemEllipse:

[legend]

Public Member Functions
	QCPItemEllipse (QCustomPlot *parentPlot)

virtual	~QCPItemEllipse ()

QPen	pen () const

QPen	selectedPen () const

QBrush	brush () const

QBrush	selectedBrush () const

void	setPen (const QPen &pen)

void	setSelectedPen (const QPen &pen)

void	setBrush (const QBrush &brush)

void	setSelectedBrush (const QBrush &brush)

virtual double	selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=0) const

	QCPItemEllipse (QCustomPlot *parentPlot)

virtual	~QCPItemEllipse ()

QPen	pen () const

QPen	selectedPen () const

QBrush	brush () const

QBrush	selectedBrush () const

void	setPen (const QPen &pen)

void	setSelectedPen (const QPen &pen)

void	setBrush (const QBrush &brush)

void	setSelectedBrush (const QBrush &brush)

virtual double	selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=0) const

Public Member Functions inherited from QCPAbstractItem
	QCPAbstractItem (QCustomPlot *parentPlot)

virtual	~QCPAbstractItem ()

bool	clipToAxisRect () const

QCPAxisRect *	clipAxisRect () const

bool	selectable () const

bool	selected () const

void	setClipToAxisRect (bool clip)

void	setClipAxisRect (QCPAxisRect *rect)

Q_SLOT void	setSelectable (bool selectable)

Q_SLOT void	setSelected (bool selected)

QList< QCPItemPosition * >	positions () const

QList< QCPItemAnchor * >	anchors () const

QCPItemPosition *	position (const QString &name) const

QCPItemAnchor *	anchor (const QString &name) const

bool	hasAnchor (const QString &name) const

	QCPAbstractItem (QCustomPlot *parentPlot)

virtual	~QCPAbstractItem ()

bool	clipToAxisRect () const

QCPAxisRect *	clipAxisRect () const

bool	selectable () const

bool	selected () const

void	setClipToAxisRect (bool clip)

void	setClipAxisRect (QCPAxisRect *rect)

Q_SLOT void	setSelectable (bool selectable)

Q_SLOT void	setSelected (bool selected)

QList< QCPItemPosition * >	positions () const

QList< QCPItemAnchor * >	anchors () const

QCPItemPosition *	position (const QString &name) const

QCPItemAnchor *	anchor (const QString &name) const

bool	hasAnchor (const QString &name) const

Public Member Functions inherited from QCPLayerable
	QCPLayerable (QCustomPlot plot, QString targetLayer=QString(), QCPLayerable parentLayerable=0)

virtual	~QCPLayerable ()

bool	visible () const

QCustomPlot *	parentPlot () const

QCPLayerable *	parentLayerable () const

QCPLayer *	layer () const

bool	antialiased () const

void	setVisible (bool on)

Q_SLOT bool	setLayer (QCPLayer *layer)

bool	setLayer (const QString &layerName)

void	setAntialiased (bool enabled)

bool	realVisibility () const

	QCPLayerable (QCustomPlot plot, QString targetLayer=QString(), QCPLayerable parentLayerable=0)

	~QCPLayerable ()

bool	visible () const

QCustomPlot *	parentPlot () const

QCPLayerable *	parentLayerable () const

QCPLayer *	layer () const

bool	antialiased () const

void	setVisible (bool on)

Q_SLOT bool	setLayer (QCPLayer *layer)

bool	setLayer (const QString &layerName)

void	setAntialiased (bool enabled)

bool	realVisibility () const

Public Attributes
QCPItemPosition *const	topLeft

QCPItemPosition *const	bottomRight

QCPItemAnchor *const	topLeftRim

QCPItemAnchor *const	top

QCPItemAnchor *const	topRightRim

QCPItemAnchor *const	right

QCPItemAnchor *const	bottomRightRim

QCPItemAnchor *const	bottom

QCPItemAnchor *const	bottomLeftRim

QCPItemAnchor *const	left

QCPItemAnchor *const	center

Protected Types
enum	AnchorIndex { aiTopLeftRim , aiTop , aiTopRightRim , aiRight , aiBottomRightRim , aiBottom , aiBottomLeftRim , aiLeft , aiCenter , aiTopLeftRim , aiTop , aiTopRightRim , aiRight , aiBottomRightRim , aiBottom , aiBottomLeftRim , aiLeft , aiCenter }

enum	AnchorIndex { aiTopLeftRim , aiTop , aiTopRightRim , aiRight , aiBottomRightRim , aiBottom , aiBottomLeftRim , aiLeft , aiCenter , aiTopLeftRim , aiTop , aiTopRightRim , aiRight , aiBottomRightRim , aiBottom , aiBottomLeftRim , aiLeft , aiCenter }

Protected Member Functions
virtual void	draw (QCPPainter *painter)

virtual QPointF	anchorPixelPosition (int anchorId) const

QPen	mainPen () const

QBrush	mainBrush () const

virtual void	draw (QCPPainter *painter)

virtual QPointF	anchorPixelPoint (int anchorId) const

QPen	mainPen () const

QBrush	mainBrush () const

Protected Member Functions inherited from QCPAbstractItem
virtual QCP::Interaction	selectionCategory () const

virtual QRect	clipRect () const

virtual void	applyDefaultAntialiasingHint (QCPPainter *painter) const

virtual void	selectEvent (QMouseEvent event, bool additive, const QVariant &details, bool selectionStateChanged)

virtual void	deselectEvent (bool *selectionStateChanged)

double	rectDistance (const QRectF &rect, const QPointF &pos, bool filledRect) const

QCPItemPosition *	createPosition (const QString &name)

QCPItemAnchor *	createAnchor (const QString &name, int anchorId)

virtual QCP::Interaction	selectionCategory () const

virtual QRect	clipRect () const

virtual void	applyDefaultAntialiasingHint (QCPPainter *painter) const

virtual void	selectEvent (QMouseEvent event, bool additive, const QVariant &details, bool selectionStateChanged)

virtual void	deselectEvent (bool *selectionStateChanged)

double	distSqrToLine (const QPointF &start, const QPointF &end, const QPointF &point) const

double	rectSelectTest (const QRectF &rect, const QPointF &pos, bool filledRect) const

QCPItemPosition *	createPosition (const QString &name)

QCPItemAnchor *	createAnchor (const QString &name, int anchorId)

Protected Member Functions inherited from QCPLayerable
virtual void	parentPlotInitialized (QCustomPlot *parentPlot)

virtual void	mousePressEvent (QMouseEvent *event, const QVariant &details)

virtual void	mouseMoveEvent (QMouseEvent *event, const QPointF &startPos)

virtual void	mouseReleaseEvent (QMouseEvent *event, const QPointF &startPos)

virtual void	mouseDoubleClickEvent (QMouseEvent *event, const QVariant &details)

virtual void	wheelEvent (QWheelEvent *event)

void	initializeParentPlot (QCustomPlot *parentPlot)

void	setParentLayerable (QCPLayerable *parentLayerable)

bool	moveToLayer (QCPLayer *layer, bool prepend)

void	applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const

virtual void	parentPlotInitialized (QCustomPlot *parentPlot)

void	initializeParentPlot (QCustomPlot *parentPlot)

void	setParentLayerable (QCPLayerable *parentLayerable)

bool	moveToLayer (QCPLayer *layer, bool prepend)

void	applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const

Protected Attributes
QPen	mPen

QPen	mSelectedPen

QBrush	mBrush

QBrush	mSelectedBrush

Protected Attributes inherited from QCPAbstractItem
bool	mClipToAxisRect

QPointer< QCPAxisRect >	mClipAxisRect

QList< QCPItemPosition * >	mPositions

QList< QCPItemAnchor * >	mAnchors

bool	mSelectable

bool	mSelected

Protected Attributes inherited from QCPLayerable
bool	mVisible

QCustomPlot *	mParentPlot

QPointer< QCPLayerable >	mParentLayerable

QCPLayer *	mLayer

bool	mAntialiased

Additional Inherited Members
Signals inherited from QCPAbstractItem
void	selectionChanged (bool selected)

void	selectableChanged (bool selectable)

void	selectionChanged (bool selected)

void	selectableChanged (bool selectable)

Signals inherited from QCPLayerable
void	layerChanged (QCPLayer *newLayer)

void	layerChanged (QCPLayer *newLayer)

Detailed Description

An ellipse.

Ellipse example. Blue dotted circles are

anchors, solid blue discs are positions."

It has two positions, topLeft and bottomRight, which define the rect the ellipse will be drawn in.

Definition at line 7546 of file qcustomplot.h.

Member Enumeration Documentation

◆ AnchorIndex [1/2]

enum QCPItemEllipse::AnchorIndex

protected

Enumerator
aiTopLeftRim
aiTop
aiTopRightRim
aiRight
aiBottomRightRim
aiBottom
aiBottomLeftRim
aiLeft
aiCenter
aiTopLeftRim
aiTop
aiTopRightRim
aiRight
aiBottomRightRim
aiBottom
aiBottomLeftRim
aiLeft
aiCenter

Definition at line 7588 of file qcustomplot.h.

◆ AnchorIndex [2/2]

enum QCPItemEllipse::AnchorIndex

protected

Enumerator
aiTopLeftRim
aiTop
aiTopRightRim
aiRight
aiBottomRightRim
aiBottom
aiBottomLeftRim
aiLeft
aiCenter
aiTopLeftRim
aiTop
aiTopRightRim
aiRight
aiBottomRightRim
aiBottom
aiBottomLeftRim
aiLeft
aiCenter

Definition at line 4227 of file qcustomplot.h.

Constructor & Destructor Documentation

◆ QCPItemEllipse() [1/2]

QCPItemEllipse::QCPItemEllipse ( QCustomPlot * parentPlot )

explicit

Creates an ellipse item and sets default values.

The created item is automatically registered with parentPlot. This QCustomPlot instance takes ownership of the item, so do not delete it manually but use QCustomPlot::removeItem() instead.

Creates an ellipse item and sets default values.

The constructed item can be added to the plot with QCustomPlot::addItem.

Definition at line 31036 of file qcustomplot.cpp.

References ecvColor::black(), ecvColor::blue(), bottomRight, setBrush(), QCPItemPosition::setCoords(), setPen(), setSelectedBrush(), setSelectedPen(), and topLeft.

◆ ~QCPItemEllipse() [1/2]

QCPItemEllipse::~QCPItemEllipse ( )

virtual

Definition at line 31060 of file qcustomplot.cpp.

◆ QCPItemEllipse() [2/2]

QCPItemEllipse::QCPItemEllipse ( QCustomPlot * parentPlot )

◆ ~QCPItemEllipse() [2/2]

virtual QCPItemEllipse::~QCPItemEllipse ( )

virtual

Member Function Documentation

◆ anchorPixelPoint()

QPointF QCPItemEllipse::anchorPixelPoint ( int anchorId ) const

protectedvirtual

Reimplemented from QCPAbstractItem.

Definition at line 23883 of file qcustomplot.cpp.

References aiBottom, aiBottomLeftRim, aiBottomRightRim, aiCenter, aiLeft, aiRight, aiTop, aiTopLeftRim, aiTopRightRim, bottomRight, QCPItemPosition::pixelPoint(), and topLeft.

◆ anchorPixelPosition()

QPointF QCPItemEllipse::anchorPixelPosition ( int anchorId ) const

protectedvirtual

Reimplemented from QCPAbstractItem.

Definition at line 31150 of file qcustomplot.cpp.

References aiBottom, aiBottomLeftRim, aiBottomRightRim, aiCenter, aiLeft, aiRight, aiTop, aiTopLeftRim, aiTopRightRim, bottomRight, QCPItemPosition::pixelPosition(), and topLeft.

◆ brush() [1/2]

QBrush QCPItemEllipse::brush ( ) const

inline

Definition at line 7561 of file qcustomplot.h.

Referenced by setBrush(), and setSelectedBrush().

◆ brush() [2/2]

QBrush QCPItemEllipse::brush ( ) const

inline

Definition at line 4200 of file qcustomplot.h.

◆ draw() [1/2]

void QCPItemEllipse::draw ( QCPPainter * painter )

protectedvirtual

Implements QCPAbstractItem.

Definition at line 31122 of file qcustomplot.cpp.

References bottomRight, QCPAbstractItem::clipRect(), mainBrush(), mainPen(), QCPItemPosition::pixelPosition(), QCPPainter::setPen(), QCPLayerable::setVisible(), and topLeft.

◆ draw() [2/2]

virtual void QCPItemEllipse::draw ( QCPPainter * painter )

protectedvirtual

Implements QCPAbstractItem.

◆ mainBrush() [1/2]

QBrush QCPItemEllipse::mainBrush ( ) const

protected

Definition at line 31194 of file qcustomplot.cpp.

References mBrush, QCPAbstractItem::mSelected, and mSelectedBrush.

Referenced by draw().

◆ mainBrush() [2/2]

QBrush QCPItemEllipse::mainBrush ( ) const

protected

◆ mainPen() [1/2]

QPen QCPItemEllipse::mainPen ( ) const

protected

Definition at line 31187 of file qcustomplot.cpp.

References mPen, QCPAbstractItem::mSelected, and mSelectedPen.

Referenced by draw().

◆ mainPen() [2/2]

QPen QCPItemEllipse::mainPen ( ) const

protected

◆ pen() [1/2]

QPen QCPItemEllipse::pen ( ) const

inline

Definition at line 7559 of file qcustomplot.h.

Referenced by setPen(), and setSelectedPen().

◆ pen() [2/2]

QPen QCPItemEllipse::pen ( ) const

inline

Definition at line 4198 of file qcustomplot.h.

◆ selectedBrush() [1/2]

QBrush QCPItemEllipse::selectedBrush ( ) const

inline

Definition at line 7562 of file qcustomplot.h.

◆ selectedBrush() [2/2]

QBrush QCPItemEllipse::selectedBrush ( ) const

inline

Definition at line 4201 of file qcustomplot.h.

◆ selectedPen() [1/2]

QPen QCPItemEllipse::selectedPen ( ) const

inline

Definition at line 7560 of file qcustomplot.h.

◆ selectedPen() [2/2]

QPen QCPItemEllipse::selectedPen ( ) const

inline

Definition at line 4199 of file qcustomplot.h.

◆ selectTest() [1/2]

double QCPItemEllipse::selectTest	(	const QPointF &	pos,
		bool	onlySelectable,
		QVariant *	details = `0`
	)		const

virtual

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/ deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

In the case of 1D Plottables (QCPAbstractPlottable1D, like QCPGraph or QCPBars) details will be set to a QCPDataSelection, describing the closest data point to pos.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, mousePressEvent, wheelEvent, QCustomPlot::setInteractions, QCPAbstractPlottable1D::selectTestRect

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, QCustomPlot::setInteractions

Implements QCPAbstractItem.

Definition at line 31095 of file qcustomplot.cpp.

References a, bottomRight, center, mBrush, QCPLayerable::mParentPlot, QCPAbstractItem::mSelectable, QCPItemPosition::pixelPosition(), result, QCustomPlot::selectionTolerance(), topLeft, x, and y.

◆ selectTest() [2/2]

virtual double QCPItemEllipse::selectTest	(	const QPointF &	pos,
		bool	onlySelectable,
		QVariant *	details = `0`
	)		const

virtual

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/ deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

In the case of 1D Plottables (QCPAbstractPlottable1D, like QCPGraph or QCPBars) details will be set to a QCPDataSelection, describing the closest data point to pos.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, mousePressEvent, wheelEvent, QCustomPlot::setInteractions, QCPAbstractPlottable1D::selectTestRect

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

You may pass 0 as details to indicate that you are not interested in those selection details.

See also: selectEvent, deselectEvent, QCustomPlot::setInteractions

Implements QCPAbstractItem.

◆ setBrush() [1/2]

void QCPItemEllipse::setBrush ( const QBrush & brush )

Sets the brush that will be used to fill the ellipse. To disable filling, set brush to Qt::NoBrush.

See also: setSelectedBrush, setPen

Definition at line 31082 of file qcustomplot.cpp.

References brush(), and mBrush.

Referenced by QCPItemEllipse().

◆ setBrush() [2/2]

void QCPItemEllipse::setBrush ( const QBrush & brush )

◆ setPen() [1/2]

void QCPItemEllipse::setPen ( const QPen & pen )

Sets the pen that will be used to draw the line of the ellipse

See also: setSelectedPen, setBrush

Definition at line 31067 of file qcustomplot.cpp.

References mPen, and pen().

Referenced by QCPItemEllipse().

◆ setPen() [2/2]

void QCPItemEllipse::setPen ( const QPen & pen )

◆ setSelectedBrush() [1/2]

void QCPItemEllipse::setSelectedBrush ( const QBrush & brush )

Sets the brush that will be used to fill the ellipse when selected. To disable filling, set brush to Qt::NoBrush.

See also: setBrush

Definition at line 31090 of file qcustomplot.cpp.

References brush(), and mSelectedBrush.

Referenced by QCPItemEllipse().

◆ setSelectedBrush() [2/2]

void QCPItemEllipse::setSelectedBrush ( const QBrush & brush )

◆ setSelectedPen() [1/2]

void QCPItemEllipse::setSelectedPen ( const QPen & pen )

Sets the pen that will be used to draw the line of the ellipse when selected

See also: setPen, setSelected

Definition at line 31074 of file qcustomplot.cpp.

References mSelectedPen, and pen().

Referenced by QCPItemEllipse().

◆ setSelectedPen() [2/2]

void QCPItemEllipse::setSelectedPen ( const QPen & pen )

Member Data Documentation

◆ bottom

QCPItemAnchor *const QCPItemEllipse::bottom

Definition at line 7582 of file qcustomplot.h.

◆ bottomLeftRim

QCPItemAnchor *const QCPItemEllipse::bottomLeftRim

Definition at line 7583 of file qcustomplot.h.

◆ bottomRight

QCPItemPosition *const QCPItemEllipse::bottomRight

Definition at line 7576 of file qcustomplot.h.

Referenced by anchorPixelPoint(), anchorPixelPosition(), draw(), QCPItemEllipse(), and selectTest().

◆ bottomRightRim

QCPItemAnchor *const QCPItemEllipse::bottomRightRim

Definition at line 7581 of file qcustomplot.h.

◆ center

QCPItemAnchor *const QCPItemEllipse::center

Definition at line 7585 of file qcustomplot.h.

Referenced by selectTest().

◆ left

QCPItemAnchor *const QCPItemEllipse::left

Definition at line 7584 of file qcustomplot.h.

◆ mBrush

QBrush QCPItemEllipse::mBrush

protected

Definition at line 7602 of file qcustomplot.h.

Referenced by mainBrush(), selectTest(), and setBrush().

◆ mPen

QPen QCPItemEllipse::mPen

protected

Definition at line 7601 of file qcustomplot.h.

Referenced by mainPen(), and setPen().

◆ mSelectedBrush

QBrush QCPItemEllipse::mSelectedBrush

protected

Definition at line 7602 of file qcustomplot.h.

Referenced by mainBrush(), and setSelectedBrush().

◆ mSelectedPen

QPen QCPItemEllipse::mSelectedPen

protected

Definition at line 7601 of file qcustomplot.h.

Referenced by mainPen(), and setSelectedPen().

◆ right

QCPItemAnchor *const QCPItemEllipse::right

Definition at line 7580 of file qcustomplot.h.

◆ top

QCPItemAnchor *const QCPItemEllipse::top

Definition at line 7578 of file qcustomplot.h.

◆ topLeft

QCPItemPosition *const QCPItemEllipse::topLeft

Definition at line 7575 of file qcustomplot.h.

Referenced by anchorPixelPoint(), anchorPixelPosition(), draw(), QCPItemEllipse(), and selectTest().

◆ topLeftRim

QCPItemAnchor *const QCPItemEllipse::topLeftRim

Definition at line 7577 of file qcustomplot.h.

◆ topRightRim

QCPItemAnchor *const QCPItemEllipse::topRightRim

Definition at line 7579 of file qcustomplot.h.

The documentation for this class was generated from the following files:

/root/ACloudViewer/app/extern/QCustomPlot/qcustomplot.h
/root/ACloudViewer/app/extern/QCustomPlot/qcustomplot.cpp

Public Member Functions

Public Attributes

Protected Types

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ AnchorIndex [1/2]

◆ AnchorIndex [2/2]

Constructor & Destructor Documentation

◆ QCPItemEllipse() [1/2]

◆ ~QCPItemEllipse() [1/2]

◆ QCPItemEllipse() [2/2]

◆ ~QCPItemEllipse() [2/2]

Member Function Documentation

◆ anchorPixelPoint()

◆ anchorPixelPosition()

◆ brush() [1/2]

◆ brush() [2/2]

◆ draw() [1/2]

◆ draw() [2/2]

◆ mainBrush() [1/2]

◆ mainBrush() [2/2]

◆ mainPen() [1/2]

◆ mainPen() [2/2]

◆ pen() [1/2]

◆ pen() [2/2]

◆ selectedBrush() [1/2]

◆ selectedBrush() [2/2]

◆ selectedPen() [1/2]

◆ selectedPen() [2/2]

◆ selectTest() [1/2]

◆ selectTest() [2/2]

◆ setBrush() [1/2]

◆ setBrush() [2/2]

◆ setPen() [1/2]

◆ setPen() [2/2]

◆ setSelectedBrush() [1/2]

◆ setSelectedBrush() [2/2]

◆ setSelectedPen() [1/2]

◆ setSelectedPen() [2/2]

Member Data Documentation

◆ bottom

◆ bottomLeftRim

◆ bottomRight

◆ bottomRightRim

◆ center

◆ left

◆ mBrush

◆ mPen

◆ mSelectedBrush

◆ mSelectedPen

◆ right

◆ top

◆ topLeft

◆ topLeftRim

◆ topRightRim